The first stage is cutting of wood from the whole wood
Cutting wood is the earliest thing to do that is cut in size to fit the object that will be made later, which is intended to create a pattern of engraving to facilitate the process of further engraving. Cut on a flat wood to create a carving pattern so that it appears to be three dimensional. This cutting process is usually done with a manual saw. Then after it has the size we need, then cut it appropriately. In the meantime, you may check out best benchtop jointer review to know about one of the best tools for making the wood surface becomes smoother.

The second stage is drawing the Carving Pattern
Draw carving with drawing tools as usual. Note, however, that wood is a solid but fibrous material. We should be able to draw with stationery that is thick enough so as not to easily erode the wood. In addition to direct drawing techniques, we can also use with sticking techniques.

This technique is quite often used because it is quite easy. We only need to know or print out of the carved image design or photograph and then take pictures of the object, then stick it on the wooden slats that would be carved by using paper glue or wood glue on the wood carving.
The third stage is to select and use the carving tools appropriately

Carving or sculpting tools among them are mandatory; A hammer of wood and a meter is a must-have for carving wood. Carved hammer is usually made of hardwood, the point is not thin fast exposed to chisel iron.

For sculptures are usually made of iron which is processed in such a way that shaped into pointy and sharp objects to dredge and process wood. While the meter is used for the bucket distance and size that we need if there is a pattern picture or patch pattern carving is less clear. Do not let We do not bucket size that fits on the carving, because this will affect the carving that has become later.